Panels
Transwall's Corporate Wall product line offers many different panel configurations:
- Solid
- Clerestory (Top Light)
- Steel/Glass
- Steel/Glass/Glass
- Steel/Glass/Steel
- Angular
|
- Full Glass
- 2G Divided Light
- 3G Divided Light
- 4G Divided Light
- 5G Divided Light
|
Panels can be painted, fabric or vinyl covered. In addition to Transwall's standard finishes, COM and custom finishes can be specified. COM and custom finishes are subject to testing and approval.
All glass panels come standard with factory glazed 1/4" clear tempered safety glass. An option of 1/4" white laminated glass is available at an additional charge. Customer specified architectural glass is available up to 3/8" thickness, subject to approval.
Back to Top
|
Trim
Corporate Wall is offered with two trim options:
- Projecting Base
& Ceiling
|
|
Back to Top
|
End Conditions
Corporate Wall has several end conditions designed to accommodate site specific building interface requirements.
- End Fillers
- Soffit/Convector End Fillers
- Angle Channels
|
- Spring Loaded End Fillers
- Telescoping Channels
- Wall Channels
|
Back to Top
|
Connector Conditions
Multiple layout options can be produced using Corporate Wall's connector conditions.
- 2-Way Furniture 90° Post
- 3-Way Furniture Post
- 4-Way Furniture Post
- 2-Way Furniture 180° Post
|
- 2-Way Building 'L'
- 3-Way Building 'T'
- 4-Way Building 'X'
- Finished End Condition
|
Back to Top
|
Door Frames
The following door frames are available for specification in Corporate Wall.
- Full Height Door Frame
- Steel Transom Door Frame
- Glass Transom Door Frame
|
- Full Height Double Door Frame
- Steel Transom Double Door Frame
- Glass Transom Double Door Frame
|
All frames can be specified as butt hinge or sliding. Steel transoms are available in paint only. Glass transoms come standard with factory glazed 1/4" clear tempered safety glass. An option of 1/4" white laminated glass is available at an additional charge. Customer specified architectural glass is available up to 3/8" thickness, subject to approval.
Back to Top
|
Doors
The following doors were designed for use with Corprate Wall door frames:
- Flush steel doors
- Half glass steel doors
- Full glass steel doors
|
- Flush wood doors
- Full glass wood doors
|
All doors can be specified as butt hinge or sliding. Steel doors are available in the standard Transwall paints, except metallics. Wood veneer doors are available in all the standard Transwall paints and wood stains. COM paints and stains can both be specified. Similar to our panels and transoms, glass doors are shipped standard with factory glazed 1/4" clear tempered safety glass. An option of 1/4" white laminated glass is available at an additional charge. Customer specified architectural glass is available up to 3/8" thickness, subject to approval.
Back to Top
|
Electrical Provisions
Panels with projecting trim have horizontal raceways for hard-wired electrical wiring and communication in the base. Switches can be mounted in full height or steel transom door frames with 3" jambs or in utility panels.
Receptacles are mounted in base of projecting panels or in utility panels. Pre-punched base trim is provided in 24" lengths with one centered standard cutout. Vertical wireways are available in panels that do not contain glass. Electric wiring can run through base, vertical wireways, end fillers or connector posts.
All wiring and electrical components to be installed in the field by a licensed electrician. |
